How To Replace Old Style Handle Set With C Elite Handle Set #522

To Order # 522 click on link: http://www.randrwindow.com/handle-c-elite-complete-kit.html

 

If you want to use C Elite Handle package to replace P/N 516 Upgrade Door Handle. Additional parts will be needed!You will need a new recessed mortise lock with the gray/sliver cylinder part# 518. You will also need the New Style Shim part #512-NEW or else the handle set will be loose. You will have to fill the top screw hole that will be left over from the old handle set. You can do this by using part number 546 or 546U binding post.Please read all details below and watch video below.

Part # 518 Mortise Lock with Gray/Sliver Cylinder Sold Separately – $40.00 each

If your Recessed Mortise Lock has the black cylinder you will need to purchase a new recessed mortise lock with the gray/sliver cylinder for this handle set to work.

Part # 512-NEW New Style Shim For C Elite handle set. Comes in white only as shown in video below. No additional cost when purchased with the C Elite Handle Set.

Part # 546 Standard Binding Post Screw – Silver Mill Finish – No additional cost when purchased with the C Elite Handle Set. No other finishes available. Will work in existing upper hole in Hurd door- no modification needed.

Part# 546U UPGRADE Binding Post Screw – Chrome, Brass Dull Finish, Dark Bronze & 18-8 Stainless Steel $16 each. 1/4″ Diameter. ***NOTE*** When using the Upgrade # 546U Binding post. The diamieter is 1/4″ so you will have to drill out the hole with a 5/16″ drill bit for these binding post to fit.

To Order #522 click on link: http://www.randrwindow.com/handle-c-elite-complete-kit.html

Leave a Reply

Your email address will not be published. Required fields are marked *