How To: Remove a casement sash from frame

Quick How To video on removing a Hurd Casement Sash from a frame in a few easy steps.

If you are replacing the operator on a Casement there is no need to disconnect whole sash from the frame. Just disconnect the operator arms from the sash bracket and/or track shoe from the sash as shown in the 1st part of the video. No need to disconnect the top and bottom hinge. Note that in this video this is a new style window and parts have the SNAP RINGS on the Hinges and sash bracket. Older style windows and parts will have a sliver or black clip that moves to detach from the sash

This video we are working on a Hurd Energy Saver casement window / Sierra Pacific WI Energy Saver –  with Truth Encore operator and Truth adjustable hinges

To buy Hurd replacement parts visit our online store at www.Hurd-Parts.com

 

Instruction for Hurd Sash Adjustment

Clipboard17

To purchase the Truth Wrench #190 go to: www.RandRwindow.com

1. The amount of sash drag (a sash is the operating part of a casement window) that this hinge will correct for is dependent on the ratio of the sash width vs. sash height. To calculate the amount of sash drag adjustment for any given window size, take the ratio of the width to height multiplied by 1/16″.

Example: sash size equals 24″ x 36″ width to eight ratio is .667 Total adjustment is .66 x 1/16″ = .042 (Approx. 3/64″)

2. To adjust the casement sash: First fully open the window. Next step the Adjustment wrench (Part # 190 To by go to: www.RandRwindow.com under Parts –  Miscellaneous) onto the base of the stud, found between the support arm and the track of the lower hinge. Swinging the wrench away from the lock side of the window will decrease the about of sash drag. The maximum sash drag adjustment is reached when the stud flats are parallel to the track. Note: Turning the stud flats beyond parallel will not increase sash drag correction.

3. For severe sash drag, a similar procedure can be sued on the upper hinge. Upper hinge adjustment is made by swinging the wrench toward the lock side of the window. Maximum adjustment is obtained when the stud flats are parallel to the track. Note: Maximum adjustment may cause biding as the window is closed, please use caution.

To purchase the Truth Wrench  #190 go to: www.RandRwindow.com